BẪY HƠI DS22, TL PLUS ENGINEERING STEAM TRAP, DS22 STEAM TRAP, VENTURI STEAM TRAP, ORIFICE STEAM TRAP, BẪY HƠI VENTURI DS22, bẫy hơi ORIFICE, bẫy hơi chống thủy kích, bẫy hơi khử thủy kích, BẪY HƠI DELTA STREAM 22, BẪY HƠI DELTA STREAM 24

Home/Technique/SATURATED STEAM SYSTEM

CEFI STEAM TRAP

Friday, Day 16/02/2024

CEFI STEAM TRAP

CEFI steam trap one piece design with custom orifice made from special stainless and the most advanced steam traps on the market, reduces energy loss, has the ability to automatically regulate discharge flow through the condensate water system. There are no moving parts inside so the possibility of damage and need for maintenance during operation is low. Connect the steam trap to the pipeline system with flanged. Steam traps are designed up to size DN50 with variety flows rate. It is depending on each the technological system. Install horizontally or vertically. The direction is marked on the steam trap body. Guaranteed successful operation with each application. Steam trap application for heating systems, moisture separation, water discharge on main pipeline.

Benefits of our Technology:

◦ Reduce energy consumption loss

◦ Heating efficiency

◦ Reduce energy cost 5% - 25%

◦ Efficient and stable heating system

◦ Highly resistant with water hammer

◦ No moving parts, so low maintenance costs

◦ Compact, lightweight, low heat emissions

◦ Water and chemical treatment savings

◦ Reduce energy consumption loss

◦ Low operating costs

◦ Improved cash flow

◦ Each trap supplied with full sizing and commissioning service

◦ 10 years performance guarantee

TYPICAL APPLICATION:

CUSTOMERS SECTORS:

• Hospitals & Hotels • Oil & Gas Industry

• Food Processing Plants • Paper & Pulp Industry

• Pharmaceutical Industry • Industrial Sector

• Chemical Industry • Commercial Laundries

• Manufacturing Industry • Power Plants

• Beverage Industry • Textile Industry and many more.

PRODUCTS:

CEFI 22 STEAM TRAP

CEFI 25 STEAM TRAP

FLASH STEAM RECOVERY

When the pressure of saturated condensate is reduced, a portion of the liquid “flashes” to low-pressure steam. Depending on the pressures up stream, the flash steam contains normally 3% to 50% of the energy content of the original condensate. Almost cases, condensate receivers the flashing steam is vented to atmosphere and its energy content lost.
WHAT IS STEAM ?
WHY USE STEAM?

There are three main forms of energy used in industrial processes: electricity, direct heat, and steam.
SATURATED STEAM TABLE
WHY NEED EVAPORATOR ?
Why we should use Pressure Reducing valve ?

All equipment has a maximum working pressure value, if the working pressure of the equipment is lower than the supply pressure of the system, we need to reduce the system pressure before entering the equipment. In case the pressure reducing valve cannot work, the pressure exceeds the threshold, there will be a safety valve to release the pressure to protect the equipment. For saturated steam systems, most boilers are designed to work at high pressure, usually cannot run at low pressure because the generated steam will be humid, low pressure requires pipes with a large enough size to meet the flowrate. Therefore, the system will operate more efficiently and economically when the steam is generated at high pressure and then reduced before entering the equipment for use. For design calculations, heating applications, from the saturated steam pressure we will deduce the temperature, from which we can choose the appropriate pressure value to calculate the application. Benefits of using saturated steam at low pressure: - Low pressure steam has higher energy than high pressure steam - The amount of flash steam produced will be less, so the energy loss from flash steam will be lower.
WHAT IS BOILER TDS?