Thermodynamic steam trap TD600, used to discharge condensate for saturated steam systems. Application for discharging condensate on main steam pipes, moisture separators.
Advantages: Not affected by water hammer, vibration and used for superheated steam.
Model TD600, TD600L
Sizes 3/8”, 1/2”, 3/4”, 1”
Connections NPT
Body Material Stainless Steel 420F
Options Insulation Cap
PMO Max. Operating Pressure 600 PSIG
TMO Max. Operating Temperature 800ºF
PMA Max. Allowable Pressure 600 PSIG up to 800ºF
TMA Max. Allowable Temperature 800ºF @ 600 PSIG
How It Works:
The disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.
Dimensions (mm):
|
Size |
Model Code |
Connection |
A |
B |
C |
Weight (lbs) |
|
3/8" |
TD600-11-N |
NPT |
1.37 |
1.69 |
2.00 |
0.75 |
|
1/2" |
TD600-12-N |
NPT |
1.50 |
2.00 |
2.69 |
1.25 |
|
3/4" |
TD600-13-N |
NPT |
1.75 |
2.38 |
2.81 |
2.00 |
|
1" |
TD600-14-N |
NPT |
2.12 |
2.81 |
3.81 |
3.00 |
|
1/2" |
TD600L-12-N |
NPT |
1.50 |
1.81 |
2.71 |
1.00 |
|
3/4" |
TD600L-13-N |
NPT |
1.50 |
2.25 |
2.75 |
1.75 |
Traffic lookup table:
Complete Unit:
.png)
